Model No :
Part Code :


The LinkRunner AT Network AutoTester offers user-configured AutoTests for a wide range of important tasks. This network tester’s quick cable test and switch identification facilitate fast problem isolation. Test results can be automatically uploaded to the Link-Live Cloud Service to improve collaboration between network engineers and technicians, creating greater job visibility, project control, and fleet management.

- Discover nearest switch name and port information via CDP/LLDP/EDP and verify link speed/duplex and connectivity to TCP/IP network with AutoTest - Validate up to 30W 802.3af/at PSE with TruePower™ loaded Power over Ethernet (PoE) test. - Verify twisted-pair cable length and wire-map in a snap
- Automate reporting and enable collaboration with upload and management test results via Link-Live -Cloud ServiceTwisted-pair/copper cable test
- (LRAT-1000 and LRAT-2000 models), fiber optic testing (LRAT-2000 only)

General Specifications
- Dimensions 3.5 in x 7.8 in x 1.9 in (8.9 cm x 19.8 cm x 4.8 cm)
- Battery Removable, rechargeable lithium-ion battery pack (18.5 Watt-hrs)
- Battery Life Typical operating life is 6 hours; Typical charge time is 3 hours
- Display 2.8 in color LCD (320 x 240 pixels)
- Keypad 12-key elastomeric
- Tone Generator IntelliTone™ digital tone: [500 KHz]
- Analog tones: [400 Hz, 1 KHz]
- Media Access; Copper RJ-45: 10BASE-T, 100BASE-TX, 1000BASE-T and PoE (IEEE 802.3af and 802.3at)Media -Access; Fiber SFP Adapter Port supports 100BASE-FX and 1000BASE-LX/ SX/ZX (LRAT-2000 Only)
- Cable Tests Pair lengths, opens, shorts, splits, crossed, straight through, and cable ID
- Single ended testing
- User-defined testing to IEEE 802.3at class 0, 1, 2, 3, 4 without LLDP negation, or 4 with LLDP negotiation