1. Testing and Measurement
  2. Earth Testers
Megger
Megger DET4TCR2 Clamps
Model No :
DET4TCR2 + Clamps
Part Code :
1000-366

Overview

The DET4TCR2 + Clamp digital ground tester is powered from 8 AA batteries which are widely available and deliver excellent testing time. The DET4TCR2 is powered from rechargeable AA cells. The battery charger is built in and the instrument is supplied with an AC/DC adaptor.

Features
- 2, 3 and 4 point testing
- Stakeless or clamp-on testing option
- ART (Attached Rod Technique) capability
- Multiple, user selectable test frequencie
- Resistance measurement range to 200 kO
- IP54 rated
- Warning indicators prevent test failure
- Simple one button operation
- Included leads, stakes, calibration certificate and rugged carry case
- Rechargeable battery powered 4-terminal tester with selectable test frequencies, greater
measurement sensitivity and attached rod technique and stakeless measurement capability
Keywords
NA
Electrical Specifications
- Ingress protection:IP54
- C stake, P stake and Noise check Automatic
- Noise rejection:40 V pk to pk 2-wire, 3-wire, 4-wire test Yes, no shorting links required
- No disconnect testing (ART) Yes, with MCC CLAMP
- Stakeless measurement :Yes, with MCC CLAMP and MVC CLAMP
- Instrument output:Voltage: ±25 V or ±50 V at 94 Hz, 105 Hz, 111 Hz and 128 Hz
- Current: 4.5 mA or 0.45 mA or 0.045 mA
- Ground current range with clamp:0.5 mA to 19.9 A
- Ground current accuracy:5% ±3 digits
- Ground voltage range:0 to 100 V ac
- Ground voltage accuracy:2% ±2 V
- Resistance ranges:2, 3, 4 pole: 0.01 O to 200 kO
- ART: 0.01 O to 200 kO
- Stakeless: 0.01 O to 200 O
- Resistance accuracy
• 2P measurements: 2% ±3 digits
• 3P measurements: 2% ±3 digits
• 4P measurements: 2% ±3 digits
- ART measurements: 5% ±3 digits
- Stakeless measurements: 7% ±3 digits
- Maximum probe resistance
• Rp limit: 200 kO (50 V output voltage)
• Rc limit: 200 kO (50 V output voltage)
- Limits reduced to 100 kO for 25 V output voltage
- Limits reduced to 5 kO for 0.01 O resolution
- Display:31/2 digit high contrast liquid crystal, backlit
- Battery type: 8 off AA (LR6) NiMH rechargeable cells
- Safety Complies with the requirements of IEC61010-1 100V CAT IV between terminal pairs
- EMC In accordance with IEC61326-1
- Standards Compliance
- Complies with the requirements of KEMA K85B
- Complies with the following parts of EN61557, “Electrical safety in
- low voltage distribution systems up to 1000 V a.c. and 1500 V d.c.
- Equipment for testing, measuring or monitoring of protective measures
General Specifications
- Dimensions
- 203 mm x 148 mm x 78 mm (8 in x 5.8 in x 3 in)
- Weight:1kg (2.2lb)
- Operating temperature range -15 °C to +55 °C / 5 °F to 131 °F
- Storage temperature range-40 °C to +70 °C / -40 °F to 158 °F
Brand SKU
NA
Rashi Part SKU
NA
Warranty
1 Year