1. Safety and Security
  2. Fire Alarm System
GST
GST-DC-9202(IS) Intrinsically Safe Conventional Manual Call Point
Model No :
Part Code :
DC-9202(IS)

Overview

DC-9202(IS) Intrinsically Safe Conventional Manual Call

Point is installed in public areas. When there is fire, pressing the glass on this MCP, alarm signal can be sent to fire
alarm control panel. It’s mainly applicable to inflammable
and explosive areas in petroleum, chemical industries.

Features
-Plug-in structure, easy for installation
-The triggering glass is restorable using a special key after pressed
Technical Specifications
-Operating Voltage Loop 24VDC (16VDC~28VDC)
-Operating Current Standby Current: 0mA Alarm Current: =30mA
-Output Capacity Volt-free normally open output contact signal, rated 30VDC/100mA, contact resistance=0.1O
-Type of Initiating Part Reusable
-Initiating Mode Pressing the glass manually
-Reset Mode Reset by a special key
-Fire Alarm Indicator Red. It is off normally and illuminates under fire condition
-Operating Environment Type: Indoor Temperature: -10°C ~ +55°C Relative Humidity=95%, non-condensing
-Dimensions 95.4mm × 98.4mm × 45.5mm (with base)
-Ingress Protection Rating IP43
-Explosion-proof Mark Exib II CT6 Gb
-Certificate Number CE11.2142
-Enclosure ABS, red. 107 O=surface resistance=109 O, Plexiglas in front
-Weight About 221g (with base)
-Mounting Hole Distance 60mm