1. Safety and Security
  2. Fire Alarm System
GST
GST-DC-9103E Conventional Rate of Rise and Fixed Temperature Heat Detector
Model No :
DC-9103E
Part Code :
DC-9103E

Overview

DC-9103E is Conventional Rate of Rise and Fixed Temperature Heat Detector, can build up fire alarm system together with fire alarm panel and other alarm devices. The detector shows fire alarm by the LED indicator and transmits the signal to the FACP

Features
-Self-diagnostic
-Reed switch test
-Fire LED allows 360° viewing
-Possible to switch off polling LED
-Remote indicator output
-3 classes programmable
-LPCB approved at EN54-5
Technical Specifications
-Operating Voltage:- K19 (16V ~ 28V)
-Standby Current:- Less than Equal to 60µA
-Alarm Current:- Less than Equal to 55mA
-Wiring:- Polarized 2-core for Zone. Polarized 2-core for remote indicator.
-Alarm:- Reset Instantaneous cut-out (10s Min, 1.0VDCMax.)
-Class and Setup:- Classes A1R, A2S, BS
-Typical Fixed Temperature:- Class A1: 58°C Class A2: 62°C Class B: 77°C
-Environment Temperature:- Class A1: -10°C ~ +50°C Class A2: -10°C ~ +50°C Class B: -10°C ~ +65°C
-Relative Humidity:- Less than Equal to 95%, non condensing
-Material of Enclosure:- ABS
-Ingress Protection Rating:- IP2X
-Dimensions Diameter:- 100mm Height: 54.5mm (with base)
-Mounting Hole Distance:- 45mm ~ 75mm
-Weight:- 110g
-Indicator:- Red, periodically flash once in polling when the status is set to “ON”; don’t illuminate when the status is set to “OFF”. Periodically flash twice in fault; illuminate in alarming.