1. Safety and Security
  2. Fire Alarm System
GST
DI-9301E Digital Single Input and Output Module
Model No :
DI-9301E
Part Code :
DI-9301E

Overview

DI-9301E Digital Single Input and Output Module provides dry contact output (normally open and/or normally closed) following command from fire alarm control panel, also possible receives switch signal (dry contact) from field equipment and transmits to FACP.The input and output can be programmed to monitor and control the same or different equipment.

Features
-Input port monitored with 4.7KO EOLR
-Normally open or normally closed contact input signal acceptable
-Input port co-operates with output or works individually
-Electronically addressed. Addresses can be modified in field
-Built-in microprocessor and AD sampling technology
-Rail mount or surface mount
•Standards: EN 54-18:2005
•Certifications: LPCB CE
•WEEE & RoHS Compliant
Technical Specifications
-Operating Voltage Loop:- 24VDC (16VDC - 28VDC) Power Limited
-Standby Current:-Less than Equal to 0.26 mA
-Action Current Loop:-Less than Equal to 0.7mA
-Output Capacity:- 2A @ 30 VDC, Normally-open/Closed
-Programming:- Electronically addressing
-Address Range:- 1 address, from 1 to 242 2 addresses, from 1 to 241
- Ingress Protection Rating:- IP30
- Operating Temperature :-10°C ~ +55°C
- Relative Humidity:- Less than Equal to 95%, Non Condensing
- Material and Color of Enclosure:- ABS, white (RAL9016)
- Dimension:- (L×W×H) 85.3mm×78mm×33mm
- Weight:- About 66.5g
- Indicator Input LED:- Red. It lights in receiving feedbacks, lights 0.5s on, 0.5s off in input faults, and flashes in other states. Output LED: Red. It lights in relay action, 0.5s on and 0.5s off as there is output fault. It turns off in other states