1. Safety and Security
  2. Fire Alarm System
Morley-IAS
Morley-IAS HM-DCMO-UL Addressable Control Module, UL-Listed
Model No :
HM-DCMO-UL
Part Code :
HM-DCMO-UL

Overview

The HM-DCMO-UL Addressable Control Module provides a
circuit for Notification appliances like horns, strobes, and more.
Addressability allows the HM-DCMO-UL to be activated through
panel programming, on a select (zone or area of coverage) basis.

Features
- Built-in type identification automatically matches devices to the control panel
- Internal circuitry powered directly by a two-wire SLC loop The HM-DCMO-UL module requires power (for horns, strobes, etc.)
- Integral green LED blinks each time a communication is received from the control panel and turns on steady red when activated
- High noise immunity (EMF/RFI)
- The HM-DCMO-UL may be used to switch 24-volt NAC power
- Wide viewing angle of LED
- SEMS screws with clamping plates for easy wiring
- Direct-dial entry of address: 61 -99 for models SMX and STX
Keywords
NA
Electrical Specifications
NA
General Specifications
- Normal operating voltage 15 to 32 VDC
- Maximum SLC current draw 6.5 mA (LED on)
- Average operating current 350 A direct poll (CLIP mode) with LED flashing
- External supply voltage maximum 80 Volts (RMS or DC)
- Drain on external supply 2 mA maximum (using internal EOL relay)
- EOL resistance 47K ohms
- Temperature range 32°F to 120°F (0°C to 49°C)
- Humidity range 10% to 93% non-condensing
- Dimensions: 4.5" (11.43 cm) high x 4" (10.16 cm) wide x 1.25" (3.175 cm) deep
- Mounts to a 4" (10.16 cm) square x 2.215" (5.398 cm) deep box
Brand SKU
NA
Rashi Part SKU
NA
Warranty
1 Year